877-881-6814
Located in Chicago
Shop by Category
Shop by Brand
Hamilton MagmaMax High Temp Extra Heavy Duty Caste
Capacity Range: 1,000 – 9,000 lbs. Temperature Range: -22 – 750° F
When you need to absolute toughest hardware for high-heat environments, the MagmaMax Series answers the call. These extra heavy duty Hamilton caster wheels are rated for up to 9,000 lbs. and 750°F. They're perfect for massive autoclaves and product finish systems in heavy manufacturing, energy, and aerospace industries.
The MagmaMax Series uses the same forged steel swivel construction from Hamilton's proven Super Endurance Series and Kingpinless Maxi-Duty (MDK) Series and enhances the design with special high-heat grease in the raceways, and high-heat precision shielded ball bearings in the wheels. Contact Access Casters Inc. to place your order for these specialty casters.
Quality Features & Specs
Review the products listed here for individual details. In general, this line of caster wheels features:
Swivel Construction: Three different styles are available. MD products have a 5/8" thick drop forged steel mounting plate (rigid plate 1/2" thick) and 3/8" x 5" precision laser-cut steel contoured legs welded inside and outside to the forged steel horn base. SECK casters have a forged steel top plate and fork base with 3/8" x 3" plate steel legs welded inside and outside to the forged steel horn base. FMK products have a 3/8" thick drop forged steel mounting plate and 5/16" x 2 1/2" plate steel legs robotically welded inside and outside to the forged steel horn base.
Kingpin: MD products feature a 1 1/4" diameter integrally forged kingpin with mounting plate guaranteed for life and threaded for a 1 1/4" slotted nut secured by roll pin for positive locking. SECK products are kingpinless. FMK casters use a 1" diameter integrally forged with mounting plate guaranteed for life, threaded for a 3/4" diameter lock nut.
Main Load Bearing: The MD line uses an HPI™ thrust bearing design with an outside diameter of 7 1/2", raceways hardened to 58-62HRC, and a 16 micro inch ground-to-surface finish. SECK caster wheels feature 3 5/8" diameter CNC-machined and hardened raceways with 5/8" balls.
FMK products have CNC-machined 3 1/4" diameter raceways and 1/2" diameter hardened and polished steel balls.
Secondary Load Bearing: MD caster wheels boast a 1 1/4" precision tapered thrust bearing design to counteract radial thrust. FMK uses a similar 1" thrust bearing design.
Axle: The MD line has a 1 1/4" diameter grade 5 hex head axle with a slotted nut and cotter pin. Both SECK and FMK uses a 3/4" diameter hex head with a lock nut.
Lubrication Fittings: MD and SECK casters feature a ball-check type design in the swivel assembly and in-wheel hubs with tapered or straight roller bearings. FMK products have a ball-check type design in the swivel assembly and wheel hub.