Product Description
Colson 6" rigid caster with conductive rubber wheel- 6" x 2" gray non-marking tread on black core
- Roller bearings
- 410 pound capacity
- Meets federal specification FF-C-88C.
- This requires an average electrical resistance of less than 250,000 ohms.
- Wheel hardness: 75 Shore A durometer
- 7-1/2" mounting height
- 4" x 4-1/2" top plate
- 3" x 3" slotted to 2-5/8" x 3-5/8" bolt hole pattern
- RoHS compliant zinc finish
Many computer manufacturers and electronics companies require conductive wheels on assembly carts to eliminate static build-up and discharge. Although conductive caster wheels have existed for years, almost all of them mark floors. Colson has solved this problem with Performa Conductive Wheels which combine a soft cushion ride with a non-marking tread design. These wheels have been rigorously tested and approved by an independent lab and meet the requirements of federal specification FF-C-88C. The specification requires an average electrical resistance of less than 250,000 ohms.
CAD DRAWINGS
Product Videos
Custom Field
Caster Type Rigid
Wheel Diameter 6"
Tread Width 2"
Brake No
Mounting Type Top Plate
Mounting Size 4" x 4-1/2"
Bolt Hole Pattern 3" x 3" to 2-5/8" x 3-5/8"
Wheel Material Rubber
Overall Height 7-1/2"
Load Capacity 410 lbs
Finish Zinc
Wheel Bearing Roller Bearing
